WINTEHCMINER.COM - Banjarmasin, Indonesia

1. Specifications of the Antminer D3 are as follows:

a) Hash rate: 15 GH/s (Variation of 5 percent is expected)
b) Power consumption: 1200W (at the wall, with Bitmain's APW3 PSU, 93 percent efficiency, 25C ambient temp).

c) Hashing algorithm: X11

2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

3. It recommends use of the APW3 plus plus PSU with the Antminer D3. One APW3 plus plus PSU can not power more than one Antminer D3.

4. All PCIe connectors on a hashing board need to be connected to the PSU for the hash board to operate. Do not connect more than one PSU to the same hashing board.

5. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

Technical Details

Processor 15 GHz ARM610
RAM 512 GB
Hard Drive 4 GB

Brand Name AntMiner
Item model number ANTMINER D3
Hardware Platform Linux
Operating System Linux
Item Weight 17 pounds
Product Dimensions 12.6 x 5.1 x 7.5 inches
Item Dimensions L x W x H 12.6 x 5.12 x 7.48 inches
Processor Brand AMD
Processor Count 1
Computer Memory Type DDR2 SDRAM
Hard Drive Interface ATA

Scrypt Mining Hash Rate: 504MH/s (±7% is expected).
Power Consumption: 800W (±10%) at the wall (with Bitmain's APW3 PSU, 93 percent efficiency, 25C ambient temp).
Power Efficiency: 1.6 J/MH at the wall (with Bitmain's APW3 PSU).
Noise level: Loud. Not for desk-top use. Sounds like a vacuum.
Chip quantity per unit: 288 x BM1485.
Rated Voltage: 11.60 ~13.00V.
Operating Temperature: 0C to 40C.
Network Connection: Ethernet (cable not included).

Technical Details

Processor 504 MHz
RAM 1 GB
Hard Drive 1 GB

Brand Name Bitmain
Series AntMiner L3+
Item model number L3+
Hardware Platform PC
Operating System Linux
Item Weight 13.2 pounds
Product Dimensions 13.9 x 5.1 x 7.4 inches
Item Dimensions L x W x H 13.86 x 5.12 x 7.38 inches
Processor Brand ARM
Processor Count 288
Computer Memory Type DIMM
Power Source DC
Voltage 12 volts

Brand
MinersLab

Hashing Speed
300MH/s

Hashing Algorithm
Scrypt

Power Consumption
430 Watts

Chip
20nm HPP (High Performance Process)

Data Interface
USB 2.0, Ethernet 100 Mbps

Warranty
15-year



We are ready to offer you one of the most expected device on cryptocurrencies’ market – Litecoin miner witch can be also used for other cryptocurrencies with Scrypt-based mining algorithms.
To create it we used all our positive experience in building Bitcoin miners and most cutting-edge technologies for computations, using Scrypt algorithm. That allowed us to reach a completely new level of creating miners for Litecoins, Dogecoins, etc. Few of these miners are successfully used for mining contracts in our data center.

Scrypter 300MH/s Rack Mount Miner allows you to be a step ahead of the others. Only quality parts and materials are used in its construction, they provide for long service life and failure-free performance. Extended warranty (15 years) covers all possible failures, although the possibility of their occurrence is extremely low.

Scrypter Miner has a built-in controller and pre-installed software. Setup and installation will take just a few minutes even if you are new to cryptocurrency mining.

1xHDMI port for monitor connection.
2хUSB ports for mouse and keyboard connection.
2xLAN Ethernet for connection a network in cascade mode
For serious professionals and investors it is possible to connect up to 32 Scrypter Miners in cascade mode via 100 Mbps Ethernet LAN, they will be controlled by one of the miners.